Your techno track is 90% done — let’s finish it together

Here’s what we will do in the session

This isn’t a livestream or a class. It’s a real in-studio session in one of Amsterdam’s finest studios Londam – with proper acoustic treatment and top-tier monitors.

You’ll send your track ahead of time. During the workshop, we’ll:

• Listen together in the room

• Show you exactly what could be improved

• And explain how to do it in your own session, step by step

We’ll go deep into:

• Mix balance

• EQ and compression

• Gain staging and stereo width

• How to keep your low end tight and clear

Also, you’ll hear before-and-after examples that show what real improvement sounds like.

Our expertise, your hard work

If you’re here, you’re probably sitting on a track that is 90% done. The sound design is almost there, the arrangement kind of works, but… something’s off.

You tweak the EQ, try another plugin, maybe even ask a friend what they think—and get a safe “sounds cool” response.

Let’s skip the guesswork.

We would like to invite you to our workshop in Amsterdam! It is for producers who want their tracks to actually sound good in a venue. You will hear your track in a pro studio, get honest feedback from certified audio engineer, and walk out with clear next steps to finally finish your music.

The details

📅 Date: Thursday 12 June 2025
📍 Location: Londam Studio, Amsterdam
🕕 Time: 18:00–21:00

What you will leave with (and actually use)

• A detailed list of fixes and tweaks for your track

• New mixing techniques you can apply right away

• Clarity on what’s holding your sound back

• Connections with other like-minded producers

• Access to our Plugin Music community for more support

As a bonus: you’ll also get a custom roadmap (where you are on your music journey).

Example of our work: Nikos – Metaturnal EP, mastered by Mattias Fridell, mixed by Michal Basar

High-end monitoring solution: 2x ATC SCM100, Helios Custom 15” Direct Servo Subwoofer, Trinnov Nova Bundle 4, Orion Studio Rev. 2017

About instructors

In one power-packed session, you’ll learn everything you need to know about crafting electronic music. We’re talking basics, genre exploration, studio tricks, making money from your passion, and even live performance tips. It’s a crash course that’ll level you up in your music career.

Our way of work is question and answer oriented. Be sure to come with a bunch of questions related to your music needs.
What if we do not cover it all? Stay in touch, we will guide you towards your goals. Also after the workshop.

Details

🌟 Date: 19-10-2023

🏢 Venue: Londam Studio, Ottho Heldringstraat 25, 1066 XT Amsterdam, Netherlands

📍 Google maps: https://maps.app.goo.gl/fmLjTamQM7onxdLNA

🕖 Start: 15:00

📆 Event during Amsterdam Dance Event

Program

15:00 – 17:00 (THE Workshop)

17:00 – 22:00 (Party & Tacos)

What is mixing?

Mixing is the process of blending individual tracks in your project using tools like volume, EQ, compression, and effects to create a coherent and balanced sound. The rendered version of your track is called a mixdown, and it’s the mixing engineer’s goal to make the track sound as good as possible before handing it to a mastering engineer.

Mixing is about creating balance and harmony between the different elements in your track. Balance is the contrast between the loudness of instruments or sounds in a track and the elements of the groove—what sounds are in your face and which are in the background. It’s also the balance of high and low frequencies to shape the tone and overall feel of a track.

Having a balanced distribution of frequencies in your track is one of the elements that give your track that professional character. Roughly speaking, you want something resembling the Nike “swoosh” to get your mix to sound like a professional techno producer. Another key part of professional mixing is taming any harsh and unpleasant frequencies and carving out space for every instrument in the frequency spectrum.

Check your references

Painters often use photos and objects as references to get their proportions right and not miss any details they want to include in their paintings. Referencing in techno music works the same way. Almost every professional producer and engineer uses reference tracks and here’s why you should too.

Without a reference track, you’re making mixing decisions blindly if you don’t have a baseline to compare your mix to. Try drawing a person’s face from memory without looking at a photo. Pretty hard, right?

Unless you’re a gifted artist, your portrait probably looks like Mr. Potato Head, and that’s expected. You probably don’t want a Mr. Potato Head mix, so use reference tracks! A great place to start is using your favourite techno tracks as references.

Anytime you listen to a techno track and notice it has a thumping low-end or love how the hi-hats sit crisply on top of the mix; add it to your collection. You’ve got to listen to a lot of techno tracks made by pros to learn how to make techno like them.

By comparing your mix with a reference, you’ll be able to answer questions like:

• How loud should I set my kick?
• Why does my low-end sound boomy?
• Why aren’t my hi-hats punching through?

Put referencing tracks into practice

Try this exercise on your next project.

Drop an audio file into your project as your reference track (use a high-quality lossless format like .wav or .flac, if possible.) Next, adjust the volume to where it’s playing at the same level as your mix.

Remember: matching the volume of your track with your reference is crucial!

Open up a frequency analyzer and check if your sounds are hitting close to the same volume across the frequency spectrum as those in your reference track.

Say that you really like how the drums groove in one of your reference tracks. You’ll want to look at the levels and frequencies where your kick, snare and hats are hitting and adjust them to match your reference. Switch between listening to your track and your reference by soloing each to hear the differences and make any changes needed.

Tune your sounds

Tuning your sounds when producing can save you a ton of time when mixing. When you tune your sounds, your mix naturally plays tighter, because you’re making sure that sounds are sitting on top of one another, creating a feeling of oneness, rather than a clash of sounds fighting one another.

This is why using your DAW’s tuner or spectrum analyzer to check frequencies is so important. Transient sounds like kicks, snares, percussions and hats often don’t have a distinct pitch, so if a tuner doesn’t work, you can try an EQ with a visual spectrum analyzer to look for the biggest frequency peaks.

Then check for clashing frequencies among sounds. If two sounds occupy the same frequency band, try pitching one of the sounds up or down to give them room to breathe.

For example, if your kick is peaking at around 55Hz—your bass will complement the kick if it’s pitched an octave or two above, at 110Hz and 220Hz. If the fundamental was 55Hz, you could end up with a muddy low-end.

Like every rule in producing music, this one can be broken. Some producers don’t tune their instruments at all. Instead, they listen for frequency masking—where one sound blends with another in the same frequencies so your ear can’t make out which sound is playing. It’s a great skill to have, and we recommend you train your ear to listen for masking while also using tuners and spectrum analyzers to be sure.

Create a groove that makes you want to move

A groovy track is a dynamic one. Listen to the best techno tracks—notice how the track’s energy rises and falls, sounds move toward the inside of your speakers, then outside. There’s a contrast between sections and individual sounds creating a feeling of movement and progression, not just relentless pounding from your speakers throughout the track.

How to add dynamics to a techno track

An easy way to add dynamics is to vary the volume of instruments over time. You can’t have a loud part if every part is the same loudness, so try lowering the volume on tracks once in a while.

Another way to make your sound organic is by changing the velocity of notes in your midi tracks. Also, go easy on compression because too much can kill your track’s dynamics.

Another good place to start is using sidechain compression on your tracks. Sidechaining can create a pumping effect and give them some bounce.

What sidechain compression does is lower the volume of a sound, but only when another sound is playing. Sidechain compression is a great technique to control the loudness of instruments playing at the same time.

In techno music, since the kick is the most important to the track, it’s often the main sidechain input. However, techno wasn’t made by people following the rules so you should try out different sidechain inputs like a synth lead into a pad, or a vocal into a lead, and so on.

By sidechaining the lead to the kick, every time the kick hits the compressor activates, lowering the volume of the lead. As always, have fun with it and try different sidechain inputs to see how they can add dynamics to your track.

Place every instrument in its own space in the frequency spectrum

Every sound should have its own area in the frequency spectrum. The idea here is to create a good tonal balance between sounds by spreading energy evenly along the frequency spectrum. Decide what frequencies are most important for a sound and carve away unnecessary frequencies, so there’s no obvious clashing between sounds.

For example, you can freely cut low frequencies (<500Hz) on your hi-hats, or shelve high frequencies (>3000Hz) on your bass. They might not sound as rich on their own but listen to how they retain their character in the mix while allowing other instruments to cut through the mix. Cutting unnecessary frequencies from a sound that you can’t hear anyway will give you a clearer mix.

It’s up to you if you want to cut specific frequencies or lower the volume of the instrument, or both. Try each out and hear what works better. Reference tracks come in really handy here – use a reference to compare its frequency balance to your mix.

Get rid of resonant frequencies

A resonant frequency is a troublesome, harsh-sounding frequency. When boosted with an EQ, these sound especially grating. You’ll want to cut those frequencies to stop your track from clipping or distorting in the mastering phase when the engineer pumps up the gain using limiters and other mastering tools.

It’s worth spending time looking for all those frequencies. Some of them you won’t even hear while listening to your track because other sounds are masking them. That’s why you should always check for resonant frequencies with each track in solo mode.

Where to look for resonant frequencies?

Every mix is different, so there aren’t any specific frequencies that will always be problematic, but we can give you some pointers.

Low End

For the low end, 200-800Hz is a good place to check because many melodic elements will have their fundamental frequencies in this range and too much buildup here can create a muddy mix.

Mids

Look out for the 1-5kHz as the human ear is most sensitive here.

Highs

Hi-hats and cymbals, especially the popular 909 kits often have resonances in the 6-9kHz range.

While a professional mastering engineer can partly fix these problems, sometimes they can’t fix them completely. Getting rid of resonances in the mixing phase can save you time and money in the mastering phase.

EQing

• Make your track brighter and make space for frequencies.
• Boost higher frequency sounds with a high-shelf EQ. Remember, even dark techno and metal tracks sound open and bright when mixed and mastered. Listen to a reference track but don’t overdo it.
• Check again and again for harsh resonant frequencies that wear your ear out.
• Steer clear of mud. To add more definition to your mix, clear up frequencies around 200-300hz. Too much content in this range can cause muddiness. Pay extra attention to this area and cut out everything you don’t need. Keep in mind, that you can sometimes leave content here to keep the character of sounds intact. Find a balance between cutting problematic frequencies and keeping the sound authentic.
• Another problematic area is around 3000 Hz. Experiment with cutting frequencies here too.

These tips will help you even if you mix music on the cheapest of headphones or monitors.

Learn how to mix techno like a pro

We covered a few techniques producers use to make professional-sounding techno tracks. By applying these principles to your mix, you’ll be on your way to producing more polished, professional-sounding tracks. While it’s a long journey learning how to mix techno music, keeping these concepts in mind when you mix will give you a head start.

Sometimes you don’t know what’s missing from your mix. That’s where a trained set of ears can save you a lot of time and headache in figuring out how to fix it. You can reach out to producers and engineers you know, post on Reddit or Discord feedback threads or book a session with a professional mixing engineer to get tailored feedback (the first one’s free!).

If you think we should cover a topic you want to know more about, f0llow us and send a DM on Instagram.

Already a pro at mixing?

Aside from music courses and educational content, we provide industry-standard mixing and mastering services.

Submit your track to our in-house legendary mastering engineer Mattias Fridell.

Recap

There’s a lot to unpack about mixing in here, but let’s sum up what we’ve learned so far.

Ear Fatigue

• Take regular breaks to reset your ears
• Mix at the same volume level
• Split up your mixing sessions

What is mixing about

• Mixing is the process of blending individual tracks in your project using tools like volume, EQ, compression, and effects to create a coherent and balanced sound
• Fixing any harsh and unpleasant frequencies
• Preparing your track for mastering

Sound quality

• Every step of production is important

Check your reference tracks

• Use a reference track to check the overall balance and clarity of your mix
• Matching the volume of your track and reference is crucial
• Use a frequency analyzer
• A/B test often

Tune your sounds

• Fine-tune instruments so your mix sounds tight

Create a groove; add dynamics

• Change up the velocity of sounds in the sound design phase, before reaching for a compressor
• Use automation to bring life and movement to your mix
• Use side-chain compression

Place instruments in their own space

• Place every instrument in its own space in the frequency spectrum using EQ, reverb, volume, and stereo imaging tools
• Never, ever, EVER, clip the master channel!

EQing

• Clear mud around 300Hz
• Use EQ to create space for each instrument and fix any harsh frequencies
• Give your track brightness with enough high-end frequencies to avoid a dull mix